Instruction Manual
READ ALL INSTRUCTION BEFORE USING
THIS MANUAL CONTAINS ASSEMBLY, OPERATION, MAINTENANCE AND SAFETY INFORMATION. IN THE INTERST OF SAFETY, PLEASE MAKE CERTAIN THAT YOU READ AND UNDERSTAND ALL THE INFORMATIONS BELOW.
IMPORTANT SAFETY PRECAUTIONS
SPECIAL RECOMMENDATIONS:
IMPORTANT:
USE THE AQUA WALKER IN FRESH WATER ONLY.
DO NOT USE THE AQUA WALKER FOR EXERCISE OUT OF THE WATER.
THE USE OF THE AQUA WALKER FOR REHABILITATION PURPOSES IS ALLOWED ONLY IF SUPERVISED BY A SPECIALIST.
WARNING : Before commencing with any exercise program, please consult your family physician.
If at any time during exercise you feel faint, dizzy or experience pain, stop and consult your family physician. In the event any of the above mentioned warnings are breached by the consumer, the Manufacturer may use same as a defense to any claim for injuries, damage or loss. The above warnings are in no way intended to limit or modify the consumer’s remedies for breach of warranties pursuant to applicable Federal and State Laws of Regulations. They are being supplied strictly to ensure the safety of the individuals using the project.
IMPORTANT :Read all instruction carefully. Set-up the AQUA WALKER in accordance with the steps in the manual. An Allen head wrench and a wrench is required for set-up.
IMPORTANT : Make sure you have all the parts listed below before beginning assembly. In case of a discrepancy, please do not return the AQUA WALKER to the store where you purchased it, Instead, contact CUSTOMER SERVICE DEPARTMANT at the number as below:
Tel :+91-8178782671/09810101913
E-mail : wetfitindia@gmail.com
Website :www.wetfitaquagym.com
When ordering parts, please use the item number, part number and description listed in the PARTS LIST.
PRE-SET UP CHECK LIST
ITEM | DESCRIPTION | QUANTITY | REMARK |
1 | Behind Leg | 2 | |
2 | Front Leg | 2 | |
3 | Behind Swing Frame | 2 | |
4 | Front Swing Frame (Right) | 1 | |
5 | Front Swing Frame (Lift) | 1 | |
9 | Foot Pedal Fixing Socket | 2 | |
13 | Allen Head Bolt M6x10 | 4 | |
16 | Allen Head Bolt M8x55 | 2 | |
18 | Washer8 | 4 | |
19 | Washer 6 | 4 | |
21 | Acorn Nut M8 | 2 | |
22 | Shaft with Ring 20 | 4 | |
23 | Hole with Ring 42 | 8 | |
24 | Bearing 6004 ZZ | 8 | |
25 | Seals 20 x 42 x 8 | 4 | |
26 | Seals 25 x 42 x 8 | 4 | |
27 | Hemisphere Pipe
Plug 32 |
4 | |
28 | Pipe Plug 32 | 6 |
3. PART INFORMATION
Fig. 1-1 Exploded – View Assembly Drawing
Note : Most parts are factory pre-assembled
PARTS LIST
PARTS No. | DESCRIPTION | QUANTITY | REMARK |
1 | Behind Leg | 2 | |
2 | Front Leg | 2 | |
3 | Behind Swing Frame | 2 | |
4 | Right Front Swing Frame | 1 | |
5 | Left Front Swing Frame | 1 | |
6 | Stick The Ground Frame | 2 | |
7 | Small Handle | 2 | |
8 | Handrail | 1 | |
9 | Foot Fixed Frame | 2 | |
10 | Big Washer | 4 | |
11 | Small Plum Blossom Handle | 2 | |
12A | Foot Pedal (Left) | 1 | |
12B | Foot Pedal (Right) | 1 | |
13 | Allen Head Bolt M6x10 | 4 | |
14 | Allen Head Bolt M8x10 | 4 | |
15 | Allen Head Bolt M8x15 | 4 | |
16 | Allen Head Bolt M8x55 | 2 | |
17 | Allen Head Bolt M12x35 | 4 | |
18 | Washer 8 | 10 | |
19 | Washer 6 | 4 | |
20 | Spring Washer 12 | 4 | |
21 | Acorn Nut M8 | 2 | |
22 | Shaft With Ring 20 | 4 | |
23 | Hole With Ring 42 | 8 | |
24 | Bearing 6004 ZZ | 8 | |
25 | Seals 20x42x8 | 4 | |
26 | Seals 25x42x8 | 4 | |
27 | Hemisphere Pipe Plug38 | 4 | |
28 | Pipe Plug 32 | 6 |
4. SETTING UP THE AQUA WALKER
Fig. 1 – Fixing The Stick The Ground Frame
STEP 1 :Open the Front leg (1) and Behind leg (2) Make sure that the legs are fully extended. Install the ground frames (6) with Front leg (1) and behind leg (2), respectively using four Spring washers (20), four Allen head bolts M12x35 (17).
Fig. 1 – Fixing The Handrail
STEP 2 :Side the Handrail (8) into the bushing, Using two washers (18) and two Allen head bolts M8x15 (15).
Repeat the same procedure for the other side.
Fig. 1 – Fixing The Handrail
STEP 2 :Side the Handrail (8) into the bushing, Using two washers (18) and two Allen head bolts M8x15 (15).
Repeat the same procedure for the other side.
Fig. 3 – Fixing Foot Pedals
STEP 3: Connect the right foot pedal (12B) into the right Front swing frame and Behind Swing Frame. Using two Bing Washers (10), two Allen head bolt M8x10 (14).
Repeat the same procedure for connecting the left foot pedal (12A) into the left Front swing frame and Behind Swing Frame.
Note : Foot pedal and foot fixed frame (9) are factory pre-assembled.
Tel (IND) :+91-8178782671
E-mail :wetfitindia@gmail.com
Website :www.wetfitaquagym.com
Reviews
There are no reviews yet.